dmesg - AMD V8700 mit dual Opteron

Return To AMD V8700 mit dual Opteron System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-18-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu2) ) #28-Ubuntu SMP Fri Mar 2 20:02:50 UTC 2012 (Ubuntu 3.2.0-18.28-generic 3.2.9)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000c7ff0000 (usable)
 BIOS-e820: 00000000c7ff0000 - 00000000c7ffe000 (ACPI data)
 BIOS-e820: 00000000c7ffe000 - 00000000c8000000 (ACPI NVS)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: empty empty/S2932/S2932-E, BIOS 'V2.03     ' 10/15/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF8000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000138000000 aka 4992M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xc7ff0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000c7ff0000
 0000000000 - 00c0000000 page 1G
 00c0000000 - 00c7e00000 page 2M
 00c7e00000 - 00c7ff0000 page 4k
kernel direct mapping tables up to c7ff0000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000138000000
 0100000000 - 0138000000 page 2M
kernel direct mapping tables up to 138000000 @ c7fee000-c7ff0000
RAMDISK: 364ee000 - 3726f000
ACPI: RSDP 00000000000f9af0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000c7ff0100 0005C (v01 101508 XSDT1420 20081015 MSFT 00000097)
ACPI: FACP 00000000c7ff0290 000F4 (v03 101508 FACP1420 20081015 MSFT 00000097)
ACPI: DSDT 00000000c7ff0470 04D4E (v01  0AAAA 0AAAA000 00000000 INTL 20051117)
ACPI: FACS 00000000c7ffe000 00040
ACPI: APIC 00000000c7ff0390 000A0 (v01 101508 APIC1420 20081015 MSFT 00000097)
ACPI: MCFG 00000000c7ff0430 0003C (v01 101508 OEMMCFG  20081015 MSFT 00000097)
ACPI: OEMB 00000000c7ffe040 00091 (v01 101508 OEMB1420 20081015 MSFT 00000097)
ACPI: SRAT 00000000c7ff51c0 00150 (v01 AMD    FAM_F_10 00000002 AMD  00000001)
ACPI: HPET 00000000c7ff5310 00038 (v01 101508 OEMHPET0 20081015 MSFT 00000097)
ACPI: SSDT 00000000c7ff5350 010F4 (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 1 -> APIC 0x04 -> Node 1
SRAT: PXM 1 -> APIC 0x05 -> Node 1
SRAT: PXM 1 -> APIC 0x06 -> Node 1
SRAT: PXM 1 -> APIC 0x07 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-80000000
SRAT: Node 1 PXM 1 80000000-c8000000
SRAT: Node 1 PXM 1 100000000-138000000
NUMA: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000)
NUMA: Node 1 [80000000,c8000000) + [100000000,138000000) -> [80000000,138000000)
Initmem setup node 0 0000000000000000-0000000080000000
  NODE_DATA [000000007fffb000 - 000000007fffffff]
Initmem setup node 1 0000000080000000-0000000138000000
  NODE_DATA [0000000137ffb000 - 0000000137ffffff]
 [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0
 [ffffea0002000000-ffffea0004dfffff] PMD -> [ffff880135600000-ffff8801375fffff] on node 1
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00138000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x00080000
    1: 0x00080000 -> 0x000c7ff0
    1: 0x00100000 -> 0x00138000
On node 0 totalpages: 524175
  DMA zone: 64 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3914 pages, LIFO batch:0
  DMA32 zone: 8128 pages used for memmap
  DMA32 zone: 512064 pages, LIFO batch:31
On node 1 totalpages: 524272
  DMA32 zone: 8192 pages used for memmap
  DMA32 zone: 286704 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 225792 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000c7ff0000 - 00000000c7ffe000
PM: Registered nosave memory: 00000000c7ffe000 - 00000000c8000000
PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
Allocating PCI resources starting at c8000000 (gap: c8000000:18000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff88007dc00000 s83072 r8192 d23424 u524288
pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1028474
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ c8000000 size 128 MB
Node 1: aperture @ c8000000 size 128 MB
Memory: 4031524k/5111808k available (6561k kernel code, 918020k absent, 162264k reserved, 6643k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=2
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2700.242 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5400.48 BogoMIPS (lpj=10800968)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
ftrace: allocating 27032 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Quad-Core AMD Opteron(tm) Processor 2384 stepping 02
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
 #2
smpboot cpu 2: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
 #3
smpboot cpu 3: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
 Ok.
Booting Node   1, Processors  #4
smpboot cpu 4: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
 #5
smpboot cpu 5: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
 #6
smpboot cpu 6: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
 #7 Ok.
smpboot cpu 7: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (43202.17 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at c7ffe000 (8192 bytes)
print_constraints: dummy: 
RTC time:  0:09:14, date: 03/08/12
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c8000000 aka 3200M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, fec0ffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c8000000, dfffffff]
TOM2: 0000000138000000 aka 4992M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0xf0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0xc8000000-0xdfffffff]
bus: 00 index 4 [mem 0x138000000-0xfcffffffff]
Extended Config Space enabled on 2 nodes
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x03af]
pci_root PNP0A03:00: host bridge window [io  0x03e0-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03bb]
pci_root PNP0A03:00: host bridge window [io  0x03c0-0x03df]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xc8000000-0xfebfffff]
pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d0fff])
pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
pci 0000:00:01.0: [10de:0364] type 0 class 0x000601
pci 0000:00:01.0: reg 10: [io  0x2f00-0x2f7f]
pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io  0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20: [io  0x2d00-0x2d3f]
pci 0000:00:01.1: reg 24: [io  0x2e00-0x2e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xfeafb000-0xfeafbfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xfeafac00-0xfeafacff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
pci 0000:00:05.0: reg 10: [io  0xd480-0xd487]
pci 0000:00:05.0: reg 14: [io  0xd400-0xd403]
pci 0000:00:05.0: reg 18: [io  0xd080-0xd087]
pci 0000:00:05.0: reg 1c: [io  0xd000-0xd003]
pci 0000:00:05.0: reg 20: [io  0xcc00-0xcc0f]
pci 0000:00:05.0: reg 24: [mem 0xfeaf9000-0xfeaf9fff]
pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
pci 0000:00:05.1: reg 10: [io  0xc880-0xc887]
pci 0000:00:05.1: reg 14: [io  0xc800-0xc803]
pci 0000:00:05.1: reg 18: [io  0xc480-0xc487]
pci 0000:00:05.1: reg 1c: [io  0xc400-0xc403]
pci 0000:00:05.1: reg 20: [io  0xc080-0xc08f]
pci 0000:00:05.1: reg 24: [mem 0xfeaf8000-0xfeaf8fff]
pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
pci 0000:00:08.0: reg 10: [mem 0xfeaf7000-0xfeaf7fff]
pci 0000:00:08.0: reg 14: [io  0xc000-0xc007]
pci 0000:00:08.0: reg 18: [mem 0xfeafa800-0xfeafa8ff]
pci 0000:00:08.0: reg 1c: [mem 0xfeafa400-0xfeafa40f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: [10de:0373] type 0 class 0x000680
pci 0000:00:09.0: reg 10: [mem 0xfeaf6000-0xfeaf6fff]
pci 0000:00:09.0: reg 14: [io  0xbc00-0xbc07]
pci 0000:00:09.0: reg 18: [mem 0xfeafa000-0xfeafa0ff]
pci 0000:00:09.0: reg 1c: [mem 0xfeaf5c00-0xfeaf5c0f]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: [10de:0376] type 1 class 0x000604
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0d.0: [10de:0378] type 1 class 0x000604
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: [10de:0375] type 1 class 0x000604
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:06.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:06.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:06.0:   bridge window [io  0x03b0-0x03bb] (subtractive decode)
pci 0000:00:06.0:   bridge window [io  0x03c0-0x03df] (subtractive decode)
pci 0000:00:06.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:06.0:   bridge window [mem 0xc8000000-0xfebfffff] (subtractive decode)
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [1033:0125] type 1 class 0x000604
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: [1033:0125] type 1 class 0x000604
pci 0000:03:00.1: supports D1
pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:0d.0: PCI bridge to [bus 03-05]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.1: PCI bridge to [bus 05-05]
pci 0000:00:0e.0: PCI bridge to [bus 06-06]
pci 0000:07:00.0: [1002:9456] type 0 class 0x000300
pci 0000:07:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:07:00.0: reg 18: [mem 0xfebf0000-0xfebfffff 64bit]
pci 0000:07:00.0: reg 20: [io  0xe000-0xe0ff]
pci 0000:07:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.1: [1002:aa30] type 0 class 0x000403
pci 0000:07:00.1: reg 10: [mem 0xfebec000-0xfebeffff 64bit]
pci 0000:07:00.1: supports D1 D2
pci 0000:00:0f.0: PCI bridge to [bus 07-07]
pci 0000:00:0f.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0f.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0f.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1c) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *14
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *14
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 00000000c7ff0000 - 00000000c7ffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x03af window]
pnp 00:00: [io  0x03e0-0x0cf7 window]
pnp 00:00: [io  0x03b0-0x03bb window]
pnp 00:00: [io  0x03c0-0x03df window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xc8000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io  0x0000-0x000f]
pnp 00:01: [io  0x0081-0x0083]
pnp 00:01: [io  0x0087]
pnp 00:01: [io  0x0089-0x008b]
pnp 00:01: [io  0x008f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [mem 0x000d0000-0x000d3fff window]
pnp 00:05: [mem 0x000d4000-0x000d7fff window]
pnp 00:05: [mem 0x000de000-0x000dffff window]
pnp 00:05: [io  0x0010-0x001f]
pnp 00:05: [io  0x0022-0x003f]
pnp 00:05: [io  0x0044-0x005f]
pnp 00:05: [io  0x0062-0x0063]
pnp 00:05: [io  0x0065-0x006f]
pnp 00:05: [io  0x0072-0x007f]
pnp 00:05: [io  0x0080]
pnp 00:05: [io  0x0084-0x0086]
pnp 00:05: [io  0x0088]
pnp 00:05: [io  0x008c-0x008e]
pnp 00:05: [io  0x0090-0x009f]
pnp 00:05: [io  0x00a2-0x00bf]
pnp 00:05: [io  0x00e0-0x00ef]
pnp 00:05: [io  0x04d0-0x04d1]
pnp 00:05: [io  0x0800-0x080f]
pnp 00:05: [io  0x2000-0x207f]
pnp 00:05: [io  0x2080-0x20ff]
pnp 00:05: [io  0x2400-0x247f]
pnp 00:05: [io  0x2480-0x24ff]
pnp 00:05: [io  0x2800-0x287f]
pnp 00:05: [io  0x2880-0x28ff]
pnp 00:05: [io  0x2c00-0x2c7f]
pnp 00:05: [io  0x2c80-0x2cff]
pnp 00:05: [mem 0xfea80000-0xfeabffff]
pnp 00:05: [mem 0xfee01000-0xfeefffff]
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x0800-0x080f] has been reserved
system 00:05: [io  0x2000-0x207f] has been reserved
system 00:05: [io  0x2080-0x20ff] has been reserved
system 00:05: [io  0x2400-0x247f] has been reserved
system 00:05: [io  0x2480-0x24ff] has been reserved
system 00:05: [io  0x2800-0x287f] has been reserved
system 00:05: [io  0x2880-0x28ff] has been reserved
system 00:05: [io  0x2c00-0x2c7f] has been reserved
system 00:05: [io  0x2c80-0x2cff] has been reserved
system 00:05: [mem 0x000d0000-0x000d3fff window] could not be reserved
system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
system 00:05: [mem 0xfea80000-0xfeabffff] has been reserved
system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [mem 0xfed00000-0xfed00fff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [mem 0xfec00000-0xfec00fff]
pnp 00:07: [mem 0xfee00000-0xfee00fff]
pnp 00:07: [io  0x0ca0-0x0caf]
system 00:07: [io  0x0ca0-0x0caf] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0a: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io  0x0a00-0x0a7f]
system 00:0a: [io  0x0a00-0x0a7f] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0xc7ffffff]
pnp 00:0c: [mem 0xfec00000-0xffffffff]
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xc7ffffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:06.0: PCI bridge to [bus 01-01]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.1: PCI bridge to [bus 05-05]
pci 0000:00:0d.0: PCI bridge to [bus 03-05]
pci 0000:00:0e.0: PCI bridge to [bus 06-06]
pci 0000:00:0f.0: PCI bridge to [bus 07-07]
pci 0000:00:0f.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0f.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0f.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
pci 0000:03:00.1: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03bb]
pci_bus 0000:00: resource 7 [io  0x03c0-0x03df]
pci_bus 0000:00: resource 8 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [mem 0xc8000000-0xfebfffff]
pci_bus 0000:01: resource 4 [io  0x0000-0x03af]
pci_bus 0000:01: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:01: resource 6 [io  0x03b0-0x03bb]
pci_bus 0000:01: resource 7 [io  0x03c0-0x03df]
pci_bus 0000:01: resource 8 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 10 [mem 0xc8000000-0xfebfffff]
pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:07: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:02.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:02.1: PCI INT B disabled
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:07:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c8000000 size 131072 KB
init_memory_mapping: 00000000c8000000-00000000d0000000
 00c8000000 - 00d0000000 page 2M
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1331165353.884:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 8002
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0d.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0e.0: setting latency timer to 64
pcieport 0000:00:0e.0: irq 42 for MSI/MSI-X
pcieport 0000:00:0f.0: setting latency timer to 64
pcieport 0000:00:0f.0: irq 43 for MSI/MSI-X
aer 0000:00:0a.0:pcie02: service driver aer loaded
aer 0000:00:0d.0:pcie02: service driver aer loaded
aer 0000:00:0e.0:pcie02: service driver aer loaded
aer 0000:00:0f.0:pcie02: service driver aer loaded
pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0f.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0f.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
Freeing initrd memory: 13828k freed
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
pata_acpi 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
pata_acpi 0000:00:05.0: setting latency timer to 64
pata_acpi 0000:00:05.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
pata_acpi 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
pata_acpi 0000:00:05.1: setting latency timer to 64
pata_acpi 0000:00:05.1: PCI INT B disabled
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeafac00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfeafb000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 4:194:152
bdi 1:4: hash matches
rtc_cmos 00:02: setting system clock to 2012-03-08 00:09:15 UTC (1331165355)
powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2384 (8 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (2700 MHz)
powernow-k8:    1 : pstate 1 (2000 MHz)
powernow-k8:    2 : pstate 2 (1500 MHz)
powernow-k8:    3 : pstate 3 (800 MHz)
powernow-k8:    0 : pstate 0 (2700 MHz)
powernow-k8:    1 : pstate 1 (2000 MHz)
powernow-k8:    2 : pstate 2 (1500 MHz)
powernow-k8:    3 : pstate 3 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1612k freed
Freeing unused kernel memory: 1200k freed
udevd[155]: starting version 175
sata_nv 0000:00:05.0: version 3.5
sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 21
ata2: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 21
sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 20
ata4: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 20
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:08.0: setting latency timer to 64
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: LITE-ON DVDRW LH-16A1S, CL04, max UDMA/100
ata1.00: ATA-7: WDC WD1600YS-01SHB1, 20.06C06, max UDMA/133
ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600YS-01S 20.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/100
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 16, addr 00:e0:81:4d:c2:40
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 22
forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:09.0: setting latency timer to 64
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 2700.109 MHz.
Switching to clocksource tsc
usb 2-1: new full-speed USB device number 2 using ohci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: CD-ROM            LITE-ON  DVDRW LH-16A1S   CL04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 17, addr 00:e0:81:4d:c2:41
forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-2: new full-speed USB device number 3 using ohci_hcd
input: Razer DeathAdder as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
generic-usb 0003:1532:0007.0001: input,hidraw0: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:02.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-2.1: new low-speed USB device number 4 using ohci_hcd
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input3
generic-usb 0003:046D:C226.0002: input,hidraw1: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:02.0-2.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input4
generic-usb 0003:046D:C226.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:02.0-2.1/input1
usb 2-2.4: new full-speed USB device number 5 using ohci_hcd
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input5
generic-usb 0003:046D:C227.0004: input,hiddev0,hidraw3: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:02.0-2.4/input0
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[463]: starting version 175
Adding 4192252k swap on /dev/sda5.  Priority:-1 extents:1 across:4192252k 
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i2c i2c-0: nForce2 SMBus adapter at 0x2d00
i2c i2c-1: nForce2 SMBus adapter at 0x2e00
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F10h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0:     0MB 1:     0MB
EDAC amd64: MC: 2:     0MB 3:     0MB
EDAC amd64: MC: 4:     0MB 5:     0MB
EDAC amd64: MC: 6:   512MB 7:   512MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0:     0MB 1:     0MB
EDAC amd64: MC: 2:     0MB 3:     0MB
EDAC amd64: MC: 4:     0MB 5:     0MB
EDAC amd64: MC: 6:   512MB 7:   512MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS6: Registered DDR2 RAM
EDAC amd64: CS7: Registered DDR2 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F10h detected (node 1).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0:     0MB 1:     0MB
EDAC amd64: MC: 2:     0MB 3:     0MB
EDAC amd64: MC: 4:     0MB 5:     0MB
EDAC amd64: MC: 6:   512MB 7:   512MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0:     0MB 1:     0MB
EDAC amd64: MC: 2:     0MB 3:     0MB
EDAC amd64: MC: 4:     0MB 5:     0MB
EDAC amd64: MC: 6:   512MB 7:   512MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS6: Registered DDR2 RAM
EDAC amd64: CS7: Registered DDR2 RAM
EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
NV_TCO: NV TCO WatchDog Timer Driver v0.01
NV_TCO: Watchdog reboot not detected.
NV_TCO: initialized (0x2440). heartbeat=30 sec (nowayout=0)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3855 MBytes.
[fglrx]   vendor: 1002 device: 9456 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
pci 0000:07:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
pci 0000:07:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.91.4 [Oct 25 2011] with 1 minors
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 18
snd_hda_intel 0000:07:00.1: PCI INT B -> Link[LNEC] -> GSI 18 (level, low) -> IRQ 18
snd_hda_intel 0000:07:00.1: irq 44 for MSI/MSI-X
snd_hda_intel 0000:07:00.1: setting latency timer to 64
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0f.0/0000:07:00.1/sound/card0/input6
type=1400 audit(1331165366.934:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=650 comm="apparmor_parser"
type=1400 audit(1331165366.934:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=650 comm="apparmor_parser"
type=1400 audit(1331165366.934:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=650 comm="apparmor_parser"
type=1400 audit(1331165366.934:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=626 comm="apparmor_parser"
type=1400 audit(1331165366.934:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=626 comm="apparmor_parser"
type=1400 audit(1331165366.934:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=626 comm="apparmor_parser"
type=1400 audit(1331165366.938:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=651 comm="apparmor_parser"
type=1400 audit(1331165366.938:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=651 comm="apparmor_parser"
type=1400 audit(1331165366.938:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=651 comm="apparmor_parser"
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011200000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
init: failsafe main process (825) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1331165370.394:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=893 comm="apparmor_parser"
forcedeth 0000:00:08.0: irq 45 for MSI/MSI-X
forcedeth 0000:00:08.0: eth0: no link during initialization
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
forcedeth 0000:00:09.0: irq 46 for MSI/MSI-X
audit_printk_skb: 18 callbacks suppressed
type=1400 audit(1331165372.022:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=935 comm="apparmor_parser"
type=1400 audit(1331165372.022:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=935 comm="apparmor_parser"
type=1400 audit(1331165372.258:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=934 comm="apparmor_parser"
type=1400 audit(1331165372.258:21): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=934 comm="apparmor_parser"
type=1400 audit(1331165380.878:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=932 comm="apparmor_parser"
type=1400 audit(1331165380.882:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=932 comm="apparmor_parser"
type=1400 audit(1331165380.882:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=932 comm="apparmor_parser"
type=1400 audit(1331165380.882:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=932 comm="apparmor_parser"
type=1400 audit(1331165380.882:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=932 comm="apparmor_parser"
type=1400 audit(1331165380.882:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=932 comm="apparmor_parser"
type=1400 audit(1331165380.882:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=932 comm="apparmor_parser"
type=1400 audit(1331165380.882:29): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=932 comm="apparmor_parser"
eth1: no IPv6 routers present
fglrx_pci 0000:07:00.0: irq 47 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1183
[fglrx] Firegl kernel thread PID: 1184
[fglrx] Firegl kernel thread PID: 1185
[fglrx] IRQ 47 Enabled
[fglrx] Gart USWC size:1256 M.
[fglrx] Gart cacheable size:498 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:fc11000, size:3ef000 
[fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000 
unity-applicati[1725] general protection ip:7f420de3635b sp:7ffff77a81a8 error:0 in libglib-2.0.so.0.3120.0[7f420ddd9000+f2000]

Return To AMD V8700 mit dual Opteron System Information